Skip to main content
RVS 3.21 Launched
Embedded Office GmbH & Co. KG and Rapita Systems announce strategic partnership
Rapita Systems and LICRIT announce strategic partnership
RVS 3.20 Launched
Control Coupling Basics in DO-178C
Components in Data Coupling and Control Coupling
The ‘A’ Team comes to the rescue of code coverage analysis
Why there’s no standard approach for Data Coupling and Control Coupling Analysis
DO-278A Guidance: Introduction to RTCA DO-278 approval
ISO 26262
Data Coupling & Control Coupling
Verifying additional code for DO-178C
HISC 2024
DO-178C Multicore In-person Training (Munich)
DO-178C Multicore In-person Training (Fort Worth, TX)
DO-178C Multicore In-person Training (Toulouse)
Event ticket sales closed
Our Anaheim Training is finished out but we have availability on our future course in Bristol, UK.
If you cannot attend this training session, please fill in your details in the Upcoming training form and we'll let you know when we schedule further sessions.
Want to learn more about multicore avionics certification?
Through a mix of theory and practical training, you will learn how to:
- Leverage industry-best approaches to AC 20-193 and AMC 20-193 compliance
- Interpret AC 20-193 and AMC 20-193 and what the objectives mean in practice
- Select the right multicore hardware for your project
- Characterize and quantify multicore interference in your platform
- Estimate worst-case-execution-time for multicore platforms
- Demonstrate robust partitioning in your multicore system
- Integrate AC 20-193 and AMC 20-193 evidence into your existing DO-178C workflow
Training Format
The training will be held at the Marriott Suites in Anaheim, CA. The training will be spread over two full days, following the agenda below:
|
21st May |
22nd May |
||
|
Session 1 |
The multicore challenge |
Session 7 |
Multicore Avionics Certification for high-Integrity DO-178C projects ( MACH 178) |
|
Session 2 |
Concepts and terminology |
Rapita's approach to AC 20-193, AMC 20-193 and CAST-32A compliance |
|
|
Session 3 |
Identifying and quantifying multicore interference |
Session 8 |
DO-178C Planning for AC 20-193 and AMC 20-193 |
|
Session 4 |
Identifying interference channels in a T2080 |
Session 9 |
Data Coupling and Control Coupling (DC/CC) |
|
Session 5 |
Introduction to AC 20-193 and AMC 20-193 |
Critical Configuration Settings (CCS) |
|
|
Session 6 |
Single core activation |
Safety Net |
|
|
Selecting hardware and RTOS |
Session 10 |
Interference channel testing |
|
|
AMP vs SMP |
Session 11 |
Worst-case execution time (WCET) determination |
|
|
Integrated Modular Avionics |
Session 12 |
Review and conclusions |
|
Alongside the training, attendees will receive:
- A free copy of our 70-page DO-178C handbook and training slides
- Complementary welcome drinks, lunch, coffee and snacks
- A course completion certificate
Training service cost
The cost of the training service is $970.00.
If you would like to include additional colleagues or would like to receive a quotation for the training service, please email info@rapitasystems.com.
The Presenters
The training will be delivered by industry experts:
Dr. Guillem Bernat - Rapita Founder
In 2004, Dr. Guillem Bernat founded Rapita Systems to commercialize technology for measurement-based worst-case execution time (WCET) analysis technology. Guillem has a PhD in Computer Science and is an expert in timing analysis for modern multicore processors.
Reza Madjidi - CEO of ConsuNova, Inc. (Guest Speaker)
Reza Madjidi is responsible for driving ConsuNova global business strategy and operations. Mr. Madjidi is an active FAA Systems & Equipment DER (Software). With 20+ years of embedded avionics experience including the development of many critical embedded avionics and safety-critical systems, he is considered a leading expert on avionics certification, working with 30+ of the world’s 50 largest aerospace companies. Holding a BSc and MBA, Mr. Madjidi enjoys hands-on work providing training, detailed gap analysis & avionics certification optimization strategies to companies worldwide. Reza Madjidi is the inventor of several software tools and solution services, including traceGEAR, reviewGEAR, and widely adopted Gap Analysis techniques that have led 15+ global companies to a successful & efficient DO-178/DO-254 compliance completion.
Daniel Funke - Multicore Software Engineer
Daniel received a Bachelor of Science in Computer Engineering from The College of New Jersey. Based in Novi, MI, Daniel plays a key role in delivering multicore verification projects in the USA.
About Rapita
Rapita Systems are experts in the field of DO-178C software verification and validation and over the last 10 years have developed a unique commercial solution to address the additional airworthiness objectives for multicore DO-178C/ED-12C projects, AC 20-193, AMC 20-193 and CAST-32A. Rapita is trusted by the world’s most prominent aerospace companies to provide tools and services for meeting AC 20-193 and AMC 20-193 objectives.
Testimonials
The feedback from previous trainees has been very positive, with several participants noting that the training had given them some great practical methods that they could apply to their projects immediately.
"The presenters led us through the certification process from start to finish and I was finally able to really see where I fit into the project I'm on."
"love the customized content and interactive discussion."
Attendees
If you are unable to attend this training course, sign up here to receive information about future training services sessions.
Venue
The DO-178C Multicore Training will be held at the Anaheim Marriott Suites in Anaheim.
12015 Harbor Boulevard, Garden Grove CA 92840, USA
